新聞banner
Your current location : Home >> News >> company news

No rivet joining process is more cost effective than welding

2019-10-21

    The rivet-free special machine VS welding editing has many disadvantages compared to the rivet-free joining process.

    

    For example, welding will burn the layer of the map; toxic fumes will be produced when welding galvanized sheet metal; the effect of welding aluminum profiles is not good. In contrast, the rivet-free joining process does not cauterize the coating surface when joining the coating material; the rivet-free joining process does not release harmful heat and fumes when crimping the galvanized material; and the aluminum profile and composite are joined The effect of the metal sheet is also very good. Therefore, the rivetless joining process is more cost effective than the welding process.

    

        Introduction of rivetless joint machine construction

    

          For it, it seems that many people can want to have a better life to accompany you and my use, but this idea is not enough to say in the riveting machine, but a big part is still yours. What the hands can decide is actually a simple one. It has a defined life for itself, but it will be disrupted by your takeover, and even bring more damage, so in a certain To some extent, you should pay attention to the main points of use. After the use is finished, after pressing and stopping, in order to better protect it from any chaos, the most important thing is to cut off the power supply and stop it in such an environment to better protect the pressure. Riveting machine. In order to better implement the responsibility of each person, in other words, in order to better protect the riveting machine, it is necessary to make a record of use, so that the existence of responsibility can be strengthened.

    

        After the end of the work without rivets, in addition to doing the above work, the most important thing to do as a manipulator is the final work, such as the debris left in the riveting machine during work. The complex cleaning is complete.

    

          In fact, this process can reduce the use of the riveting machine in more cases, and more maintenance still exists.

    

        Which industries are mainly used without rivet connections?

    

          New connection method without rivet connection technology, no rivet connection technology uses sheet metal crimping machine and special joint mold, through a momentary high pressure processing process, according to the cold extrusion deformation of the material of the plate itself, forming a certain tensile strength and resistance The stress-free stress-free concentrated interior inlaid dots can be used to connect two or more layers of different materials with different thicknesses. The rivet-free connection technology does not require any surface on the surface of the panel, and the original coating and paint layer on the surface of the panel at the joint is not damaged. The connection process is highly automated, and can be connected at the same time at a single point or multiple points, and can perform damage-free connection strength detection and automatic monitoring of the whole process, and the production efficiency is extremely high. The rivetless connection technology is mainly used in the automotive industry, home appliance industry, electronics industry, hardware industry and other stamping processing board parts industry.

    

        Zhejiang no rivet connection plane

    

Recently Viewed:

Tel: 13776173322 Fax: 53105101


Address: N0.88Kuntai Road(Tianggong Industrial Park)Taicang City Jiangsu P.R. China


Copyright ? SuZhou Simitch Machinery CO.,LTD Specializing in ,Welcome to inquire!
汽車零部件鉚接專機  汽車零部件鉚接專機

Mobile station

WeChat

Contact

TEL:0512-53105098

Message
{转码词1},{转码词2},{转码词3}