Detailed description of the rivetless connection

    ●It is easy to detect the connection strength without damage.

     ? The material is squeezed at the joint and thus strengthened. There is no mechanical stress concentration phenomenon and no connection deformation.

     ● Perfect connection even on extremely narrow flange edges or in small installation spaces.

     ● The bearing capacity of the dot connection is independent of the direction of the load, that is, the bearing capacity is the same whether it is subjected to shear load or subjected to a top pull load.

     ● Compared with spot welding, the cost can be saved by 30 to 60%.

     ● No punching, no waste, no iron filings.

     ● The static connection strength of a single point connection is 70% of spot welding. Dynamic fatigue joint strength is much higher than spot welding.

     ● Multiple points can be connected at the same time, and the efficiency is extremely high.

     ●Do not damage the plating or coating of the working point at the connection point, without the need for subsequent painting and plating. Textile, plastic, foil, film, paper, sealing material, insulation, etc.) Note:

     ● Only the gas-liquid booster cylinder stamping equipment has the function of “soft” in place to meet the use of the rivetless mold connection.

     ● For different products, there are different equipments to adapt.

     ● According to different plates, pressing pressure and demolding strength, design different tooling to meet your different requirements.

    The advantages of the rivetless jointer are also outstanding:

     1. The cost is greatly reduced. Firstly, the rivet-free machine directly deforms the busbar plate without any rivets or bolts, and the parts are reduced. The direct benefit is the reduction of procurement cost and management cost. Secondly, the power consumption of the rivet-free riveting machine is extremely low due to The actual use is a cylinder. It only needs to provide a gas source and a control power supply with a very low power consumption of about 60 watts. It can work without a rivet connection, so the cost of using a rivetless connector is also very low. Finally, the procurement cost of the rivetless joint machine is also very low, and the general price is about 3-4 million yuan, which is obvious compared with the self-pierce riveting machine.

     2. High efficiency. No rivet jointer connection also requires no nailing, inspection and other processes. In theory, its efficiency is better than self-punching, and the rivet-free riveting machine can be installed on the numerical control system for digital automatic production.